Dozer Track Repair Tips

Dozer Track Repair Tips

Dozer track repair is a key component of maintaining heavy equipment.dozer track repair It can extend the life of your machine and reduce the overall cost of operation, which is important for any business, but especially in a construction environment.

Dozier tracks are designed to disperse the weight of your dozer more evenly than tires can.dozer track repair This can keep your machine from sinking in mud, sand and rocks that may be challenging for other types of vehicles.

A dozer's tracks are made of steel, though they can also be rubber.dozer track repair They are open to the elements, which means they are prone to wear and tear, but they can be easily repaired to help your dozer work longer.

Monitor your track tension: Check the tension in your tracks when your machine is in actual working conditions and adjust it as needed. This helps ensure that your dozer puts all its available power to the most productive use possible and reduces accelerated bushing wear and premature track wear.

Avoid high ground speeds: Operating at excessive ground speed accelerates undercarriage wear. It also can cause the tracks to slip off the sprocket. This can happen if you drive at high speeds in reverse or push your dozer in a forward direction, which is common when moving to a new area.

Minimize track spinning: If you must turn, try to make wide turns instead of tight ones that put torsional loads on the track and undercarriage. Counter-rotation, or pivot turns, causes accelerated wear and can cut your tracks.

Dozer downhill: Downhill operating puts less stress on the rear of your dozer, reducing wear and increasing productivity. It also uses gravity to your advantage, which lowers stress on the driving mechanisms.

Alternate right and left sides: Using the right-side of your dozer for ripping and the left-side for dozing minimizes wear by alternately turning from one side to the other within a production cycle.

Be careful to back up and down slopes: The added pressure on the front of your dozer and its driving mechanism when you move on a slope can cause undercarriage wear, especially if you're tearing up rock. Dozers that have to be backed up tend to spin their tracks in order to move out of the way, which accelerates wear and can damage or even destroy the track.

Consider a drawbar when digging, loading and other operations: Use the drawbar to pull your dozer out of tight holes rather than spinning the tracks in order to get out of them. This minimizes wear, and it allows the operator to do other tasks with the machine's rear, minimizing the time required to clear a site.

Don't operate the dozer in reverse: Excessive reverse operation accelerates undercarriage wear, reducing your machine's productivity and increasing its operating costs. This can be avoided by using the transmission controller to limit the dozer's reverse speed when you're working on a jobsite.

Your dozer's undercarriage is a major investment that should be taken care of. Proper shoe selection and smart operational techniques can extend the life of your dozer's undercarriage and save you money in the long run. Your local Cat dealer can provide information about undercarriage selection, operation, maintenance and repair.

Tags:aftermarket dozer parts | case 350 dozer track chain | cat track parts | crawler track